PY Online Forums - Bringing the Pontiac Hobby Together

PY Online Forums - Bringing the Pontiac Hobby Together (https://forums.maxperformanceinc.com/forums/index.php)
-   SOLD Pontiacs (https://forums.maxperformanceinc.com/forums/forumdisplay.php?f=492)
-   -   62 Catalina 2dr Sedan plus 421 engine (https://forums.maxperformanceinc.com/forums/showthread.php?t=866968)

tom s 05-30-2023 10:34 PM

62 Catalina 2dr Sedan plus 421 engine
 
5 Attachment(s)
Helping a lady sell her late husbands project.Fresh out of the paint shop.8 lug car.
Engine is a 389 block,3 in main 4 in stroke crank.Shortblock assm by Engine Supply.306 SD heads done by Dave at SD.Cam specked by Ken Croche.Will come with 4 speed trans.Has 20K in the engine alone.20K for complete project.Located in Tustin CA.

tom s 05-30-2023 10:37 PM

Email t.schlauch@yahoo.com if interested.
Too much to list,complete from carbs,2 pc alu bell housing,clutch,flywheel and 4 speed and linkage.Also can call 5622430570.Tom

mgarblik 05-31-2023 10:39 AM

Wow! What a deal for someone. GLWS

carcrazy 05-31-2023 01:45 PM

That is a hell of a deal!

tom s 05-31-2023 07:24 PM

OK some more info.The car has a fiberglass front bumper and hood.There is a complete(need to find)SMS cloth interior.The car has all the glass installed,comes with a new gas tank,needs the brake MC installed and brake lines done.We yet to find the parking brake linkage that connects the front cable to the rear cable.He was putting the car back together when he up and died.I know he has 20K in parts in the engine WITHOUT any labor.The engine comes with carbs,air cleaners and fuel lines and linkage supplied by Jon Redder(61-63) on this site,all still in boxes as come from Jon.The Exhaust manifolds are RARE alu reproduction SD with cast iron collectors and comes with upside down starter.The engine has not been started yet,the engine was primed and lifters adjusted by the Engine Supply engine builder.Im going up to car this Sunday and can get more picks.I know it has a posi rear end,think 4.10s and aftermarket axles.He was in the progress building his car of his youth.We would like to finish the car and let his wife run it down the strip but none of us have the time to do it and I know to take it to a shop if you could find one avail would cost her way too much so just trying to move it.Email me if really interested and I can get more pics this Sunday when I go up.Please no looky loos if possible.We are virtually giving the car away with the engine.Tom

Jim Zeek 05-31-2023 07:45 PM

wish it wasnt so far

tom s 05-31-2023 07:55 PM

Im sure we can get the engine and trans set in the car and parts in the car and trunk to ship as a roller.Tom

tom s 05-31-2023 08:00 PM

3 Attachment(s)
Couple more pics

J GLASGO 06-01-2023 11:30 AM

Any interior pics?

tom s 06-01-2023 12:30 PM

I will go up and get some pics this weekend,I know the interior has not been put all back when he passed.I know he bought SMS for it just have to find it all.Front seat was in as I remember.I think the rear seat is on top of his 64 Corvette,not sure where the headliner material is.Tom

61-63 06-01-2023 03:52 PM

Incredible deal as others have said you posted it two days ago I'm surprised it's still available. If I was only ten years younger.

tom s 06-01-2023 05:22 PM

few guys asking for more info,just a bummer when the owner dies while putting the car back together.There are lots of parts around and we are trying to separate 61 and 62 parts.We sold the 64 2 plus 2 last week.Tom.

tom s 06-03-2023 06:12 PM

5 Attachment(s)
Pics

tom s 06-03-2023 06:15 PM

5 Attachment(s)
More

tom s 06-03-2023 06:18 PM

5 Attachment(s)
Even more

tom s 06-03-2023 06:22 PM

5 Attachment(s)
Few more

tom s 06-03-2023 06:24 PM

That is the SMS headliner material.Seats are SMS material.He did not do the door panels as it was to be a race car?Tom

tom s 07-01-2023 10:48 PM

4 Attachment(s)
More pics

tom s 07-01-2023 10:48 PM

Still for sale

rod cole 08-08-2023 02:43 AM

Would there be any interest in selling the body/trim with out the engine. If so how much. Thanks Rod

tom s 08-08-2023 08:58 AM

Not at this time.In fact we are planning on putting the engine and trans in the car in the next few weeks.Tom

Island Boy 08-08-2023 10:10 PM

Are you going to put the clutch plate,pressure plate,throw out bearing and clutch fork in when you drop the engine and trans in?

tom s 08-09-2023 09:55 AM

Yes we are planning on that.Tom

63 Pontiac 08-09-2023 04:50 PM

Tom, is this a pump gas engine or will it need more octane?

tom s 08-09-2023 06:12 PM

pump gas,9.5CR

Island Boy 08-12-2023 01:59 PM

Anyone interested in a 1969 GTO convertible? Would trade for this Catalina. Contact me for pictures. WT engine with 3 speed manual trans. Running and driving. Car is in northern Indiana.

carcrazy 08-12-2023 04:53 PM

This is a heck of a deal...hard to believe it hasn't been scooped up. If I hadn't just bought one recently it would be in my garage by now.

242177P 08-13-2023 09:25 PM

Seriously? I'll hijack the hijack
 
Quote:

Originally Posted by Island Boy (Post 6447008)
Anyone interested in ... with 3 speed manual trans.

How much for just the Dearborn transmission? Have cash.

Island Boy 08-19-2023 11:30 PM

The Dearborn is free with the rest of the car

Island Boy 08-20-2023 09:21 PM

Not trying to hijack- trying to get this car.

mmarx 08-23-2023 09:19 AM

Tom, I sent you a PM.

Mr Twister 09-10-2023 06:13 PM

Tom, has this sold yet?

tom s 09-10-2023 06:47 PM

No deposit,I took the engine up last week,I’m getting knee surgery this Thursday so I’m out of commission for awhile.The other 2 guys are planning on getting it in week after next.Do have a real buyer who has bought one of my cars in the past.Tom

Mr Twister 09-10-2023 07:29 PM

I am interested. Have wife approval. But its a drive for me from Michigan. Should we talk tomorrow.??

tom s 09-30-2023 05:47 PM

2 Attachment(s)
Well,my knee replacement held up getting the engine in the car.A couple of friends got it in today.Could not get the tans in as the ball in the Ansen bell would not fit the fork.Still for sale.

62cat421sd 11-06-2023 07:01 PM

hi tom did car sell yet v ance

tom s 11-06-2023 07:33 PM

Not yet!

Adecco 01-11-2024 11:07 AM

text me at 708-834-8733 with a number we can talk about the car. thanks Tom

tom s 01-14-2024 06:38 PM

Sale pending

Mr Twister 02-10-2024 09:06 PM

did it sell? pm if needed.

tom s 02-10-2024 09:19 PM

I have not checked with the seller to see if she got her deposit.I know the buyer and seller have spoke to each other.He is in the Midwest and not ready to move it until about April if I remember.tom

Mr Twister 02-10-2024 09:33 PM

[QUOTE=tom s;6484770]I have not checked with the seller to see if she got her deposit.I know the buyer and seller have spoke to each other.He is in the Midwest and not ready to move i

I got 10k to get that project car and parts. I will drive out , Iam not trying to insult anyone , but times have changed.

tom s 02-10-2024 09:41 PM

It sold for 20!Tom

Mr Twister 02-10-2024 09:45 PM

Great!


All times are GMT -4. The time now is 06:33 AM.