61-63 Parts Wanted
 

Casperson signed off on selling parts in the Tech forum. Makes sense to have a wanted thread as well. Lets try to keep all parts wanted requests in the Tech forum to this sticky.

63 steering wheel
 

Looking for a black steering wheel for my wife's 63. I have a half descent horn ring but the two wheels I have are badly cracked. I have a deluxe one that needs repaired but $1500 plus exchange is too much.

Black Steering Wheel
 

Heater63, I have a standard black steering wheel for sale. PM me.

http://forums.maxperformanceinc.com/...4&d=1426199557

I tried to pm you but all I ever get anymore is "data base error".

Here is my email, heater63@gmail.com

wheel
 

ebay # 231510720887

Heater63, check tour PM's. Apparently the notifications still aren't working.

Kick down cable needed
 

I need a kick down cable for a 62 4cyl auto.
Thanks, Colt.

ttt

When I needed one for my 62, I used 2 of the adapters for a Lokar throttle cable. I used one on each end. Although you may need to open the hole on the carb and also the trans for the stud to go through.

http://www.summitracing.com/parts/lok-s-1034/overview/


I went to my local hardware store and bought a length of small cable. I was lucky, in that the tube was still in the car, just not the cable. I suppose if you don't have the tube, a piece of brake line would work.

Thanks for the idea, the tube is still in the car so I guess i get to make one.

Looking for a good manual steering pitman arm for a 63.Thanks jim

Jim, Rare Parts will rebuild yours for about $200 including shipping. http://rareparts.com/
Gary

Thanks Gary but I have 4 63's and 2 of them are bad. looking for 1 good one and then going to try to rebuild the bad one I take off. To many cars not enough money! Jim

rebuild of manual Pitman arms
 

Gary, How recent is the RARE PARTS info? A few years ago I talked with them about the manual units and they were wanting about $280 and you had to furnish a core piece. They told me that supplies of core pieces had virtually dried up at that time.

Doug,
Very recent, I had one in my hand in September that my friend just got back from Rare for $197. He was impressed with the quality and wanted to show me before he put it in. Another friend told me the same price, he just got his back from them two weeks ago and he lives in Canada.

Go on their website and take a look for part number 20744 or search by vehicle and price is $197 R & R only, you have to send them yours.
http://shop.rareparts.com/smtp/shopd...&%20COMPONENTS

Gary

Both of my extras are bad too. Good used ones are hard to find. Good thing you only need 2 and not 4. I think C5farmer or Keith rebuilt one and posted it here.
Gary

I THINK I've STILL GOT THE ONE OUT OF MY 62.
I'll look to see if I still have it tomorrow.

GT.

That would be great. Tried to send you a pm, not sure it worked.

Concretehart has 2 good ones for me.thanks py

Pitman arm
 

Thanks for the update.

That looks like a good deal for sure. I notice the one pictured in their ad has a grease fitting added to it. That is a nice touch. (Wonder why Pontiac didn't do that originally?)

I found it, I just got home from work and the wife
And I are going out to eat. I'll get some pics later tonight
when I go out to the garage and post them for ya.
I'll be back on here in a while.

GT.

Heres a few pics of the kick down cable for ya.
What kind of shipping would I do to ship this.
It's awful long. I've got some long card board tubes
that might work. Anyway heres the pics.

GT.

Email sent.

ISO a good '61 floor.

Rochester 2GC
 

I am trying to locate a choke manifold plate for the 63 336. Ames has it listed for the 195-4 only - part LN401D. I spoke with Ames and they did not know if it would fit. Has any one tried this part in the 336. Another option I am considering is pluging and going with an electric choke. Can any one recommend an electric choke for the 2GC. Thanks,

Sent you a PM. with my phone number.

GT.

Looking for pitman arm, idler arm, lower ball joints and control arm bushings for 63 Lemans manual steering box. If anyone knows a decent website to order from, let me know. I saw the rareparts.com link THX!!

'63 LH Sun Visor Bracket
 

Looking for a LH sun visor bracket for convertible to replace one that has broken. Could also use a mirror with the sun visor hook which is also broken.

lower ball joints
 

On the lower ball joints, there are ball joints advertised on Ebay, etc. as fitting the 63 but they don't. The correct 63 uses a "pressed-in fit" style and the wrong ones are threaded (screw-in) types used on Buick Skylarks.

I suggest that you buy a complete rebuild kit from KANTER. It won't include a new/rebuilt Pitman arm.

Hey Colt, Give me a call lost your number.

Thanks Gary.

ISO plug n play 215 for a '61 auto application. For now, I'm not interested in sourcing parts from around the country, so a complete running carb-to-pan-to-flexplate-to-fan-to-exhaust manifolds-to-starter purchase works best.

61-63 Parts Wanted
 

Looking for a decent 63 Instrument Cluster as well as a rebuildable fuse block.
JK

63 Cluster and Fuse block
 

I have a dash with all 4 gauges including a clock. I believe I have a fuse block as well. I drive a truck and will be home on Sat and can send you more pics/info...

On the facebook group for the 63 Lemans I have pics posted

Tom mirror bracket pics
 

Let me know if ur interested. I'll look for the sun visor bracket this weekend.

Chiefkey. Dash & Gauges
 

Here's pics of the one I have. Let me know if interested.

Intrument Cluster & Fuse block
 

Thanks Robin, but I've already bought what I was looking for. I'll keep you in mind as other needs come up though.
JK

215 Bell housing
 

Looking for a 61-2 215 Bell Housing for an automatic trans-axle
Thanks!
Gary

mirror
 

Looking to buy an outer fender mount rear view mirror for a 1962 tempest.
also driver side rear quarter chrome spear moulding for a 4 door sedan

The the same as a 61. I removed one from a guys car and installed a remote control one. May still have the old one.

if you end up finding it pm me a pic and price, thanks!

I am looking for the rubber(ish) o-ring/gasket between the fuel tank and fuel nozzle for the rear facing 63 lemans gas tank.

Does anyone have one or a source for a substitute?

Mike,,, good talking with you the other day & good to see the LeMans! Someone here should have what you are looking for

For what it's worth, I posted an introduction in the "projects" thread with pictures of the car, but the post is waiting for an admin to approve it. That has been over a week ago. Does this usually take this long?

I think the O rings is same as early chevy?Tom

Looking for a convertible top switch for a 63. Thanks Jim

switch
 

I have a vert. top switch for sale. $75 plus $5.80 shipping.

PM sent

1962 dash trim Part # 4861989. Needs to be real nice condition.

4 cylinder camshaft
 

Looking for a good 4bbl 4 cylinder camshaft for a 62. Can be a 2bbl that I can send it out for a regrind if the price is good.

Did you get my pm about that rear view mirror?