PY Online Forums - Bringing the Pontiac Hobby Together

PY Online Forums - Bringing the Pontiac Hobby Together (https://forums.maxperformanceinc.com/forums/index.php)
-   61-63 Tempest & LeMans TECH (https://forums.maxperformanceinc.com/forums/forumdisplay.php?f=427)
-   -   61-63 Parts For Sale (https://forums.maxperformanceinc.com/forums/showthread.php?t=771402)

JohnFromVentura 08-30-2016 11:51 PM

Wondered where the mirror control actually mounts? John
Quote:

Originally Posted by Peter Serio (Post 5623080)
NOS fender mounted cable remote mirror. I am pretty sure that the same casting # was used on both Lemans and big cars in '63. All mounting pieces are present. $475
The chrome on this mirror is all original, GM and it is in beautiful condition.
There is a tiny date code on the glass it reads: 6-DMI-2


Peter Serio 08-31-2016 03:07 PM

Front fender mounted Chrome Mirrors
 
1 Attachment(s)
On all early '60s Pontiacs I have seen the control for the fender mounted mirror goes into the painted section of the dash; and to the left of the steering column. It is down towards the lower edge of the steel where it turns under. On many cars the 3 holes for the "joystick" control are already pre-punched. As this mirror was offered from the factory; also as a dealer installed accessory.

Peter Serio 09-01-2016 01:09 PM

NOS 2 speed wiper Motor 63 Tempest or Lemans
 
4 Attachment(s)
I had this saved. It fits 1963 only, the small GM cars. 2 speed motor, never used or installed. Mint condition. $250

Peter Serio 09-01-2016 01:24 PM

NOS '63 Lemans V8 motor mount (326)
 
3 Attachment(s)
One side only, GM NOS. Never used or installed. $50

Sanduners 09-03-2016 05:55 PM

Spare parts
 
1 Attachment(s)
Spare parts - :bounce: Looking for a good home

1963 Tempest rear light housings - left and right
$49 + shipping each

1963 Lemans rear end housings - left and right
$49 + shipping each

1963 right front headlight eyebrow
$35 + shipping

All prices are negotiable... ;)

ta-69 09-25-2016 08:23 PM

3 Attachment(s)
For sale 1963 4 cylinder 4 bbl intake with non original carburetor. In good condition. Asking 225.00 plus the ride.call 603 477 7984 Thanks Jim

ta-69 09-25-2016 08:40 PM

For sale 1963 4 cylinder 4 bbl intake with non original carburetor. In good condition. Asking 225.00 plus the ride.call 603 477 7984 Thanks Jim

62cat 09-27-2016 08:36 AM

1961 Tempest
 
4 Attachment(s)
Looks like an NOS driver side grill. No wear around screw holes or anywhere. $150 plus S&H

Sanduners 10-15-2016 07:24 PM

62 Pontiac Tempest STAINLESS GAS DOOR GUARD
 
1 Attachment(s)
A new stainless gas door trim / molding. Dress up your Tempest with this accessory trim part.

$30 plus shipping.

Sanduners 10-15-2016 07:28 PM

62 & 63 Reverse - BackUp lights
 
2 Attachment(s)
A good pair of reverse lights. Chrome is pretty good and I've cleaned them up and painted the backs.

$45 plus shipping

Sanduners 10-17-2016 10:44 PM

Throw out bearings
 
1 Attachment(s)
I have a couple used clutch throw out bearings, they both appear in good condition and turn smooth.

$20 for the two and free shipping

tiacguy 10-26-2016 12:25 PM

62 Tempest Lemans rear panel molding
 
3 Attachment(s)
Used very Nice 62 rear trunk panel molding. only one very small pit on the "C" chrome real nice studs in tack 150.00 free shipping.

tiacguy 10-26-2016 12:36 PM

61 Tempest radiator support panels left-right NOS
 
2 Attachment(s)
61 Tempest radiator support panels both left and right NOS never installed. $ 450.00 shipped Could also be used on the 62 by adding the two inner grill brackets which I'm pretty sure I have. I'd give them also if I can find them? I also have lots of nice head light bezels and stainless retainers

tiacguy 10-26-2016 12:41 PM

62 Tempest Wagon tail light Lens Nos
 
1 Attachment(s)
62 Tempest Wagon Tail Light Lens NOS in the box. $18.00 shipped. Has some handling scratch's from been handled.

JohnFromVentura 11-27-2016 02:38 PM

63 Front Facia & Grill
 
3 Attachment(s)
Nice restorable 63 front fascia and grill. Would need a little work as shown. Yes, I know the center emblem holes have been filled. Comes with a set of 63 T3 headlights if that's important? $125 + shipping from So Calif 93003.

tom s 11-27-2016 03:19 PM

I have a V8 radiator shroud I bought,had powder coated and found it wont fit my 4 cyc car.I have $250 in it.Can email or text pics.Tom

JohnFromVentura 11-27-2016 05:05 PM

63 Only Directional Signal Switch NEW NOS
 
3 Attachment(s)
63 Tempest directional signal switch ... New Old Stock. Fits 63 only!
$125 shipped.

JohnFromVentura 11-27-2016 05:12 PM

Front Bumper Brackets 63
 
2 Attachment(s)
Nice set of 63 front bumper brackets. Might fit 61-62?
$30 + shipping from 93003 (So Calif)

JohnFromVentura 12-06-2016 05:14 PM

Free 63 Rear Seat!
 
Have a nice recovered upper and lower rear 63 coupe seat "FREE" to anyone that picks them up in So. Calif. Recovering is more on the 2" tuck and role type ... not original. Will ship for nominal $1000

Sanduners 12-22-2016 06:28 PM

Coat hook
 
2 Attachment(s)
Have a good coat hook, still pretty shinny.

$5 - includes shipping USPS first class mail.

Sanduners 12-22-2016 06:31 PM

Inside fender vent covers
 
2 Attachment(s)
A pair of inside fender vent covers, these keep the dirt and leaves out.

$7 shipped

Sanduners 12-22-2016 06:38 PM

Air cleaner
 
4 Attachment(s)
Air cleaner for a 4cyl Tempest 195. In good condition. This model accepts the downspout. Base is 2 5/8 in for the single carb.

$99 (obo) plus shipping

Sanduners 01-02-2017 11:18 AM

3 Attachment(s)
4 cylinder intake manifold -

$50 obo plus shipping

indiantony 01-02-2017 12:22 PM

Quote:

Originally Posted by indiantony (Post 5389604)
3 speed torque tube and shaft $50
Remote mirror $75
Brake and clutch pedals $150
Emergency brake pedal $20
Doors from a 4 door $40 each
Sun visors $5
Original radio delete plate $200
Rims $20
Emergency brake cable $25
Speedometer cable $25
Fender extensions $25
Quarter panel extensions $25
Lemans gas door $20
Tempest tail light lens $20
Hood hinges $20
4speed shifter rod $50
Hub caps $10 each
Bucket seats $300
Repro Dash shifter delete plate $35 unpolished $40 polished
Many more parts also
Prices Do Not include shipping
Tony
917-681-6534

BUMP

indiantony 01-02-2017 12:22 PM

BUMP

indiantony 01-02-2017 12:24 PM

Quote:

Originally Posted by indiantony (Post 5483302)
If anyone is looking too repair any rotted "Frame" section this is whats left of a 63 that I parted out.

BUMP

Sanduners 01-10-2017 11:52 PM

Rear Window
 
2 Attachment(s)
A very good rear window from a 1963 Tempest 4 door sedan. Includes stainless trim. (this only fits the 4 door)

$50 plus shipping costs

kingjames455 01-12-2017 08:43 PM

You still got fender extension?

Sent from my SM-G935T using Tapatalk

kingjames455 01-12-2017 08:48 PM

Still have header and valance for sale if so would separate need valance

Sent from my SM-G935T using Tapatalk

JohnFromVentura 01-12-2017 11:02 PM

Have a front valance only, also. PM me with email for pictures?
John

Quote:

Originally Posted by kingjames455 (Post 5682223)
Still have header and valance for sale if so would separate need valance

Sent from my SM-G935T using Tapatalk


kingjames455 01-13-2017 10:26 AM

Mking455@hotmail.com

Sent from my SM-G935T using Tapatalk

63gpman 01-23-2017 09:13 PM

I just listed a front and rear set of NOS 61-62 bumper guards on epay. Starting price of $75 for both front and rear sets. http://www.ebay.com/itm/282336304605...84.m1555.l2649

heater63 02-03-2017 05:41 PM

336 for sale
 
I am looking to sell my 63 Pontiac 336 cu

I have recently had it rebuilt by a trusted and reputable machine shop here in Ontario. There is honestly less than 500 miles on this motor, I have always ran Brad Penns Green oil in it and changed that every season.

I believe I will be able to find the build sheet from the machine shop but will list a few things that were done to the motor.

30 over
Egge pistons
New water pump / RARE
Mild street cam / Comp cams (will find cam card as well
New oil pump
Point ignition
Triple angle valve job
Rebuilt heads

No alt or carb

The only reason I am selling is moving up to a 455. And know it would just sit on a stand for years and not do anything with it.

I am located in Ontario Canada but could ship from Niagara Falls NY or possibly meet.

$2000 o.b.o.

Heater63@gmail.com
519-719-4875

Thanks for looking,
Heath

tiacguy 02-17-2017 11:03 AM

61-62 Wagon tail light lens Guide R2AZ-61
 
1 Attachment(s)
61-62 wagon tail light lens Guide R2AZ-61 New in original box. Has a few lite scratches from the box/handling. $25.00 shipped from Auburn Pa 17922

tiacguy 02-17-2017 11:14 AM

61-62 Tempest Fresh Air vent covers
 
4 Attachment(s)
61-62 Fresh Air vent covers I have two pair. Price is one set. $85.00 shipped. Real nice almost NOS condition. No rust or damage. Original paint Shipped from Auburn Pa 17922

tiacguy 02-17-2017 11:22 AM

61-62 Tempest Radiator upper support bracket
 
2 Attachment(s)
61-62 Tempest Radiator upper support bracket. Used very nice solid piece. Has rubber mount also. $40.00 plus actual shipping From Auburn Pa 17922

tiacguy 02-17-2017 11:31 AM

61-62 Tempest Hood release catch.
 
2 Attachment(s)
61-62 Tempest Hood release catch. Nice used condition. I have two for sale price is for one. $45.00 plus actual shipping from Auburn Pa 17922. There is a picture of both very similar condition. All threads good condition.

Poncho-V 02-26-2017 12:33 PM

Sun 4 cyl. tach
 
I have decided I'm not gonna use this old 4 cyl. tach. I was going to have it refurbished, but have done nothing to it. Anyone interested?

https://scontent-sea1-1.xx.fbcdn.net...54&oe=593F1C23

https://scontent-sea1-1.xx.fbcdn.net...15&oe=593FA06C

https://scontent-sea1-1.xx.fbcdn.net...53&oe=592634C7

https://scontent-sea1-1.xx.fbcdn.net...92&oe=592CC1E3

https://scontent-sea1-1.xx.fbcdn.net...a6&oe=592EA5C8

Sanduners 02-28-2017 12:30 AM

61 - 62 Tempest fender scripts
 
3 Attachment(s)
A good set of fender Tempest scripts / emblems.

$25 shipped.

Doug 02-28-2017 10:16 AM

tach
 
[QUOTE=Poncho-V;5702909]I have decided I'm not gonna use this old 4 cyl. tach. I was going to have it refurbished, but have done nothing to it. Anyone interested?[QUOTE]

Does it work?

Is it for 4cyl only? (Need mods to use with 8cyl?)

Price?

Poncho-V 03-03-2017 10:57 AM

Doug, this is a 4 cyl. tach that needs refurbishing. I have done some cleaning on it. It is 4 cyl. only from Sun. Check the pic of the back of the housing.

Doug 03-04-2017 05:04 PM

tachs
 
1 Attachment(s)
I couldn't tell from your pics if it was similar to an old Dixco tach that could easily be changed from 8 to 6cyl.

Thanks!

heater63 03-24-2017 03:48 PM

Quote:

Originally Posted by heater63 (Post 5692428)
I am looking to sell my 63 Pontiac 336 cu

I have recently had it rebuilt by a trusted and reputable machine shop here in Ontario. There is honestly less than 500 miles on this motor, I have always ran Brad Penns Green oil in it and changed that every season.

I believe I will be able to find the build sheet from the machine shop but will list a few things that were done to the motor.

30 over
Egge pistons
New water pump / RARE
Mild street cam / Comp cams (will find cam card as well
New oil pump
Point ignition
Triple angle valve job
Rebuilt heads

No alt or carb

The only reason I am selling is moving up to a 455. And know it would just sit on a stand for years and not do anything with it.

I am located in Ontario Canada but could ship from Niagara Falls NY or possibly meet.

$2000 o.b.o.

Heater63@gmail.com
519-719-4875

Thanks for looking,
Heath


Sold

Peter Serio 03-26-2017 07:52 PM

1963 Lemans in Dash Factory Tach
 
5 Attachment(s)
For sale one original 1963 Tempest or Lemans Tach. Very clean. Meter is fine; electrical circuit has an issue. I am going to take it apart and repair. Since these tachometers have a sealed circuit board I am going to remake the circuit package.


As buyer wishes I can rebuild this to work on either a 4 cyl or a V8 engine. It works off of the stock distributor (points only). You much have the original distributor in your engine with points for this to work.

A 4 cyl tachometer for a '63 Tempest is very rare; I have only seen 2 in my lifetime.

Price is $495

ronk455 05-16-2017 07:03 PM

61-62 Tempest top of rear quarter trim pieces
 
4 Attachment(s)
These fit 61 or 62 Tempest. One side has a dent, the other side is untouched.

$40.00 plus shipping

ronk455 05-16-2017 07:06 PM

61-62 2 spd automatic valve body
 
3 Attachment(s)
Removed from my 62 Tempest 2 speed auto.

$50.00 plus shipping

blueghoast 05-17-2017 11:07 PM

Quote:

Originally Posted by ronk455 (Post 5739667)
These fit 61 or 62 Tempest. One side has a dent, the other side is untouched.

$40.00 plus shipping

Aren't they identical from side to side, If so I'll take em

GT.

ronk455 05-18-2017 11:32 AM

PM sent to blueghoast
.

blueghoast 05-27-2017 06:34 PM

Sorry about the delayed response.
I'll send you a PM.

GT.

Poncho_Villa 06-07-2017 08:25 PM

I have some parts that I know I will no longer need so I'm just wondering how much interest there is. I have a 3 speed tranny, torque tube with shaft intact, 3 speed shifter complete, clutch/brake pedal assembly with clutch linkage, complete front engine cradle with steering and brake components. There are fined drums on that. Everything is from a V8 car. Shoot me a PM.


All times are GMT -4. The time now is 07:35 PM.