PY Online Forums - Bringing the Pontiac Hobby Together
Page 2 of 2 1 2
Show 50 post(s) from this thread on one page

PY Online Forums - Bringing the Pontiac Hobby Together (https://forums.maxperformanceinc.com/forums/index.php)
-   61-63 Tempest & LeMans TECH (https://forums.maxperformanceinc.com/forums/forumdisplay.php?f=427)
-   -   63 Lemans Brakes (https://forums.maxperformanceinc.com/forums/showthread.php?t=688968)

TempestFugit 02-06-2012 09:10 PM
Right. I wonder which side Kanter is selling!?

From the Kanter online catalog:
Item # 02030D Wheel Cylinder 1963 - 1963 Pontiac Tempest, LeMans, GTO Each - Rear only $75.

GaryK 02-06-2012 10:04 PM
Quote:
Originally Posted by Peter Serio (Post 4544947)
For the rears, there is a RH and a LH side, they are different.

Has to do with the casting and the angle that the lines enter from.
Peter is correct and I believe the fronts are slightly larger than the rears and they are also left and rights because of the angle of the lines. Got my sets NOS from eBay.

As for White Post restorations,former Little Indians president had them done by White Post and very happy with the quality.

JohnFromVentura 02-06-2012 11:24 PM
I had my 57's MC done by White Post with good luck. Probably a lot of specialty shops around that do good work also! John

62 tempest nashville 08-06-2012 10:37 PM
what is the bore size for the 62 front wheel cylinders ??

mechanickeith 08-06-2012 10:43 PM
15/16

62 tempest nashville 08-06-2012 11:20 PM
i was just looking at the autozone website and the only thing i found that is 15/16 was the back of a 61 Ventura ??

Is there a simple (re-fit) rebuild kit we can use for the 62 front cylinders ?

mechanickeith 08-06-2012 11:40 PM
Have not bought them in a while but the kit numbers I have used are NAPA kit #250 And Raybestos WK322.


All times are GMT -4. The time now is 01:02 PM.
Page 2 of 2 1 2
Show 50 post(s) from this thread on one page