PY Online Forums - Bringing the Pontiac Hobby Together

PY Online Forums - Bringing the Pontiac Hobby Together (https://forums.maxperformanceinc.com/forums/index.php)
-   Pontiac - Race (https://forums.maxperformanceinc.com/forums/forumdisplay.php?f=419)
-   -   I have the best set of Edelbrock Performer Pontiac heads on the planet! (https://forums.maxperformanceinc.com/forums/showthread.php?t=768061)

Tom Vaught 01-18-2015 06:52 PM

Quote:

Originally Posted by KO (Post 5341031)
show up and qualify in the top 8

What, Racing against Fords? Not a chance.

Tom V.

mike leech 01-18-2015 07:12 PM

Does anybody else find it odd that both the motor and the car have been listed for sale since all this started?

KO 01-18-2015 07:21 PM

motor has been for sale for a while, building a smaller motor so I don't have to weigh 3600#, Jeffs going to make it look better

Scott Rex 01-18-2015 08:03 PM

Quote:

Originally Posted by David Holmberg (Post 5341059)
Party at Bradenton, the weather is great and the track is hooking!

Rub it in why don't 'cha! ;) We had a 26 car pile up on the highway today. All roads were frozen this morning...

David Holmberg 01-18-2015 08:40 PM

Quote:

Originally Posted by Scott Rex (Post 5341163)
Rub it in why don't 'cha! ;) We had a 26 car pile up on the highway today. All roads were frozen this morning...

We had one here too, but it was caused by 5 teenage girls walking to the beach in bikinis. ;)

KO 01-18-2015 08:54 PM

https://www.youtube.com/watch?v=OV2rhZjhY14

johnta1 01-18-2015 09:08 PM

Quote:

We had one here too, but it was caused by 5 teenage girls walking to the beach in bikinis. ;)
Dang snowbirds, don't know how to drive in these conditions.

:D

Jeff Kinsler 01-18-2015 09:32 PM

Quote:

Originally Posted by KO (Post 5341136)
motor has been for sale for a while, building a smaller motor so I don't have to weigh 3600#, Jeffs going to make it look better

Bring the engine over tomorrow and trans

BruceWilkie 01-18-2015 09:42 PM

Quote:

Originally Posted by Jeff Kinsler (Post 5341017)
Get motor and trans over here.lol

KO = Kinsler and Owens??? ... Do it!

GTO Dan 01-18-2015 10:05 PM

Quote:

Originally Posted by Jeff Kinsler (Post 5341217)
Bring the engine over tomorrow and trans

Who is going to drive in the race? This sounds like PY Outlaws...Dave owns and drives the Sonoma but that other guy owns the engine. :D

So this is a Jeff vs. Mike race? Is that why the trash talking subsided or did Mike's keyboard give out from the pounding? :D

Tom Vaught 01-18-2015 10:16 PM

Michigan had a very bad pile-up in severe fog a few days ago. 195 car and truck pile-up just west of Battle Creek, Michigan. I could understand that in Florida with a nude beach close by.

Terrible.

Tom V.

KO 01-18-2015 10:22 PM

There would be no way in hell I would drive Jeff's car even if he wanted me to. Too nice for me.

mike leech 01-18-2015 10:35 PM

Quote:

Originally Posted by GTO Dan (Post 5341240)
Who is going to drive in the race? This sounds like PY Outlaws...Dave owns and drives the Sonoma but that other guy owns the engine. :D

So this is a Jeff vs. Mike race? Is that why the trash talking subsided or did Mike's keyboard give out from the pounding? :D

No. Lol. I've done all I can do to make this happen.

If KO drops off the engine Jeff will wring it out and we will race. He will find the potential of the combo.

But KO will conveniently sell it or get lost on the way or need an emergency histerectomy or some thing else.

BruceWilkie 01-18-2015 10:51 PM

Quote:

Originally Posted by GTO Dan (Post 5341240)
Who is going to drive in the race? This sounds like PY Outlaws...Dave owns and drives the Sonoma but that other guy owns the engine. :D

So this is a Jeff vs. Mike race? Is that why the trash talking subsided or did Mike's keyboard give out from the pounding? :D

I think so... Jeff started this...Post 8 of Johns thread.
http://forums.maxperformanceinc.com/...d.php?t=767579

KO 01-18-2015 10:54 PM

Jeff can play with my old motor while I work on the new one.

mike leech 01-18-2015 11:11 PM

Quote:

Originally Posted by KO (Post 5341279)
Jeff can play with my old motor while I work on the new one.

Take a picture of it in his driveway and post it.

KO 01-18-2015 11:30 PM

I need to make some more updates first, no cameras allowed

mike leech 01-18-2015 11:37 PM

Quote:

Originally Posted by KO (Post 5341302)
I need to make some more updates first, no cameras allowed

here we go....:rolleyes:

KO 01-18-2015 11:40 PM

the pistons are wrong, they are a universal design meant to work with the other heads that were on it so the compression is a little lower than Id like and I think the cam might need a rethink (power falls off over 7800RPM)

mike leech 01-18-2015 11:47 PM

Quote:

Originally Posted by KO (Post 5341306)
the pistons are wrong, they are a universal design meant to work with the other heads that were on it so the compression is a little lower than Id like and I think the cam might need a rethink (power falls off over 7800RPM)

LOLLOLOLOLOLOLOL!!!!!!

So this is a "my motor is better after I find a better car, And crew, and trans, and rebuild it different and better........AFTER all that it'll be better."

WTF????? stop being an excuse filled sissy.


All times are GMT -4. The time now is 03:17 PM.