nytrainer nytrainer is offline

Ultimate Warrior

Visitor Messages

Showing Visitor Messages 1 to 6 of 6
  1. njsteve
    11-17-2015 04:54 PM
    njsteve
    Thanks for the offer. Another member sent me a photo of his 74 Formula with those tires/wheels and they filled up the rear wheel wells nicely. He did say the fronts rubbed on turns though.
  2. mscicluna007
    11-17-2014 04:26 PM
    mscicluna007
    Hi Dave,
    Thanks for all your help.
    Michael
  3. Ed Fitzgerald
    03-29-2014 03:25 PM
    Ed Fitzgerald
    Dave, I didn't get a set of instructions with the posi sets Monzaz sent me. I was told to just phone him with any questions.Otherwise I would have given you my copy. Ed
  4. dmorg1
    12-03-2011 08:46 PM
    dmorg1
    Dave,

    Just wondering how you made out with the power steering pump. Did you get the new seals in?

    I haven't had time to mess with any of the car projects I have in the works but I was able to get the last of my A/C components to Classic Air for testing and duplication. I'm hoping to get this A/C system back together before the year ends. I started this project last November when I replaced the heater core in the coupe.

    Dave
  5. anewtoi
    11-24-2011 01:17 AM
    anewtoi
    hey dave
    ya, im in the process as we speak of pulling the dash and putting in another one. ive got pics up of the new one. dont know how far along you are, but its best to go ahead and pull the seats and steering wheel. i pulled the dash before and it was a real pain with that stuff in the way. plenty of nuts and bolts to get to that you just cant properly get to. mark the screws and bolts so you dont forget where they go. maybe different baggies or something. the toughest thing will be the headlight switch. theres a little pushbutton which it about 10 o clock if you are facing the dash. but its behind the dash. push that in while pulling the knob all the way towards you. or, you can loosen all the other screws and pull the dash out about an inch and reach it with a long screwdriver. be careful with the dash bezel as its old and brittle. ive got some pics but havent posted them yet. my winter project includes buying a compressor and air tools to sand and paint the lower metal section of the dash and the top metal portion as well. and change the bezel totally. new autometer gauges. if youre going with a dash tach, theres an illumination wire prewired in for you. its grey and has a blue connector behind the dash. as far as the pad, theres about 5 screws that hold it to the dash. all easily reachable. the bezel has the 3 at the top when you pull the pad, remove the glovebox and theres another. then about 3-4 behind the dash. radio, ignition, and wiper bezels need to be moved before attempting to remove the dash bezel. hows that for "a few tips".. keep me posted
  6. gtogtogto
    09-19-2011 08:38 AM
    gtogtogto
    I just looked at your profile and we both drive red 68's and both born on March 2nd. Spooky.

About Me

  • About nytrainer
    Cars
    1968 LeMans Convertible 350HO - 4 speed 1968 LeMans Convertible 350 - 4 speed 2007 Solstice GXP 5 speed convertible
    Location
    Long Island, NY
    Interests
    my kids, Guitars and Pontiacs
    Occupation
    Dad
  • Signature
    1968 LeMans conv. 350 HO - 4 speed triple white (hear it idle here) https://www.youtube.com/watch?v=eVmq...ature=youtu.be
    1968 LeMans conv. 350 - 4 speed Solar red/pearl

Statistics

Total Posts
Albums
Visitor Messages
Total Thanks
General Information
  • Last Activity: Today 01:16 PM
  • Join Date: 08-12-2011
  • Referrals: 0

Friends

Showing Friends 1 to 10 of 11

All times are GMT -4. The time now is 02:17 PM.

 

About Us

The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.

 




Copyright © 2017