I have a set of #18s on an engine. I would like to get $800 for the pair. lmk.

Jim Good talking with you today.

Hello Jim. I see a set of 2.32" Titanium Intake valves on here. Did you go with 5/16" diameter on the Intakes?? I think you had mentioned that you went with this valve size. Just need to confirm the diameter. Motor is still apart. The cam plate was junk as the cam walked forward and galled the cam plate. Scott Sims is making me a Torrington timing set. Plus the rod side clearance was too tight. There was black marks on some of the sides of the rods. Hope all is well. Talk with you soon.

Jim,
For the Milt Schornack and the Royal Bobcat GTOs book, you can send a PayPal payment to: writeway@bellsouth.net. Send the $34 as you're sending to a friend/relative. It saves those crazy fees. Also, include your address!

hello Jim my name is Franklin you and I have spoken a while back I'm in the process of building a Pro charged motor working with Mark luhn I would like to talk to you about ram air five heads dci!! Your website is your old phone number and they are no longer connect you please provide me with a phone number and we can talk? schuman45@embarqmail.com thanks a lot franklin from fl

Hello Jim. We need to talk. Some issues with the chamber size on these heads. I will call you a little later.
Mike.

Hi Jim,
I have a Tomahawk intake coming in and would like to ask you about doing some work on it. Tried to phone numbers on your website but was told they are not in service.

Enjoy your break buddy. lol Them Chinese have no idea what's about to hit em!!

Good. We have torn down the short block and we found three things. That we need to discuss. Call when you can. Parts such as crank and timing cover look good so we are progressing. The valve job is complete and we need to discuss cam and other parts that will be reused and which to buy.
325 201-4618 cell
Thanks,
Jim

Hey Jim...How are things progressing on the GTO motor? Thanks Louis