Conversation Between Jim Robertson and potentpontiac
Showing Visitor Messages 1 to 2 of 2
-
Hello Jim. I see a set of 2.32" Titanium Intake valves on here. Did you go with 5/16" diameter on the Intakes?? I think you had mentioned that you went with this valve size. Just need to confirm the diameter. Motor is still apart. The cam plate was junk as the cam walked forward and galled the cam plate. Scott Sims is making me a Torrington timing set. Plus the rod side clearance was too tight. There was black marks on some of the sides of the rods. Hope all is well. Talk with you soon.
-
Hello Jim. We need to talk. Some issues with the chamber size on these heads. I will call you a little later.
Mike.