FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
|||
|
|||
68-71 Miscellaneous Parts (30066)
All this stuff is in new or like new condition and been kept inside the house.
I inherited most of these with the car. Only USA shipping. Most shipping is pretty expensive these days, but some prices that say shipped include it. If you are West cost I may add 5-$10 depending on size and my mood that day. I have pics so let me know what you want to see. Cash, check, money order, no Paypal. Marietta 30066 Not satisfied with anything except glove box, send it back for refund. 1. Kick Panels with 60W speakers I think came from OPGI : $120 shipped * Speaker gets in the way of getting my left foot in/out since my hand controls below steering wheel limit space. * Passenger side had a very minor crack maybe 1/4" at piece that sticks up. This does not affect the sturdiness - seems same as Driver side. I went ahead and put 3M glue on back as precaution. * Driver's side has light marr/scuff from parking brake getting it out. * Neither speaker has been ever hooked up. My Lemans still has non working AM radio so I can't tell you how they sound. 2. 68 Tempest front parking lenses, new : $50 shipped * don't know if OEM or repro ? 3. Lemans 'Sport' emblem, New repro : $30 shipped 4. 68-72 glove box cover only, not metal back : $15 shipping cost * I painted back and taped it off. When I pulled tape some paint 'dots' pulled off the front. Probably just needs some vinyl paint. * hinge good, looks like mounting holes were elongated by someone. * when I drilled out rivets, drill size did not affect plastic rivet holes 5. Holley 4150 fuel regulator mount, new : $30 shipped * includes some fittings from carb to regulator. * Does not leave much room left if you have vac secondaries and choke. 6. Frt/Rear Black Door panels, new, unassembled, 70 GTO/Lemans : * They go together $150 + shipping/insur (oversize box?) * you'll need to reuse your upper curved cardboard, add lock button trim, lower trim, and mounting hardware * back side looks to have all punchouts for regulator, handle, rest, etc. A bit of work but may save some money. * 16 lb. box 7. Frt/Rear Black Seat Upholstery (70 GTO/Lemans/Tempest) : They go together $200 + shipping/insur (oversize box?) * PUI brand from OPG, new, still in original, unopenned bags with part# * front buckets : BKTS GTO 70 BLACK 'S' 70GS10US * rear bench CPE GTO 70 BLACK 'S' 70GS10CS * 25 lb. box 8. Summit? billet distributor, about 1,000 miles. Pontiac 326-455 * $100 + shipping/insur * Cu/Silver mech advance springs/wts (Moroso, I believe). All in @3200 is what my notes said. * adjustable vac advance set for 12 degrees (max is 16) * Cap Has Brass contacts, looks to be a really good quality distributor, and ran good. Since the contacts are brass I am not certain it's a Summit because they currently show metal contacts. * Ran good but car shut down randomly. Swapped to a Pertronix and car still shuts down so it's not the distributor. Don't need 2 and I am not swapping back. 9. Pontiac wire looms : $35 shipped * one has slight bend out at last block but probably not noticeable when wires are in place. * these require custom length wires which is why I am selling. I just had put new wires in and not buying more. Neil
__________________
1971 Lemans, Wht/Blk, 400/TH400 2-brl, frt. disk kit, HD -2" spindles, PST, UMI trailing arms/sway bar, Edlebrock, Holley 650, Eaton 3.08, still in progress 1976 Olds 442, 350/TH350, Eldelbrock RPM and 600cfm, headers, flowmaster 50's, PST HD suspension, Catapaults |
#2
|
|||
|
|||
P.M sent about 68 parking lenes.
|
#3
|
|||
|
|||
Sorry Dan. Looks like I made a typo on the Tempest lenses. They are 69's. I will send you a picture to see if they are the same as 68.. Can't figure out how to edit/correct the post So:
2. 69 Tempest front parking lenses, new : $50 shipped * don't know if OEM or repro ?
__________________
1971 Lemans, Wht/Blk, 400/TH400 2-brl, frt. disk kit, HD -2" spindles, PST, UMI trailing arms/sway bar, Edlebrock, Holley 650, Eaton 3.08, still in progress 1976 Olds 442, 350/TH350, Eldelbrock RPM and 600cfm, headers, flowmaster 50's, PST HD suspension, Catapaults |
#4
|
|||
|
|||
70 frt and rear seat covers
Do you still have?i dont have the correct buckets with headrest will these fit nob headrest seats? And will you cine down in price if you still have?
|
#5
|
|||
|
|||
If you go to Original Part Group site and type in the 70GS10US, you can see the details. Same for back seat covers. They are comfort weave and do no include headrest covers. Says PUI brand HR covers can be ordered separate. Whether they fit your seat I don't know. What car did you yank them out of ?
Price stays. These are new still in the bag. BKTS GTO 70 BLACK 'S' 70GS10US CPE GTO 70 BLACK 'S' 70GS10CS * 25 lb. box
__________________
1971 Lemans, Wht/Blk, 400/TH400 2-brl, frt. disk kit, HD -2" spindles, PST, UMI trailing arms/sway bar, Edlebrock, Holley 650, Eaton 3.08, still in progress 1976 Olds 442, 350/TH350, Eldelbrock RPM and 600cfm, headers, flowmaster 50's, PST HD suspension, Catapaults |
#6
|
|||
|
|||
ill take the seat covers. pm sent
|
#7
|
||||
|
||||
I sent you a PM yesterday
__________________
I have a website for cars and parts that I am selling: http://www.gto-by-pontiac.com |
#8
|
|||
|
|||
Seat Covers
Quote:
|
#9
|
|||
|
|||
SOLD
1. front and rear GTO seat covers 2. Wire Looms
__________________
1971 Lemans, Wht/Blk, 400/TH400 2-brl, frt. disk kit, HD -2" spindles, PST, UMI trailing arms/sway bar, Edlebrock, Holley 650, Eaton 3.08, still in progress 1976 Olds 442, 350/TH350, Eldelbrock RPM and 600cfm, headers, flowmaster 50's, PST HD suspension, Catapaults |
#10
|
|||
|
|||
Distribuitor
Happy New Year for everyone. Hi I am interested in the distribuitor. Enrique 323 6036943 Text me pictures please. thank you
|
Reply |
|
|