[Schroeder]

Hey guys I need comp cams hydraulic rollers part number 857-16 I believe. I want these quick because I plan to order them monday or tuesday if I cant get them quick. I know, I didnt give u guys much time. Also need...

MSD 6AL entite setup.
1.75" dougs dport headers
Edelbrock torker II intake
1.65 rocker arms
Flow kooler water pump
Mellings m54ds oil pump
12 bolt rear end with 4.10s
Steel bellhousing to accommodate m21 and a tremec in the future


I dont necessarily care if the stuff is used so long as it's in great condition post here AND pm me please. We can exchange numbers to call or text and get the dealing process done quickly. Thanks a lot guys. This is all for a 77 trans am

[tom s]

You have been using Dave,why not give him a shot?Tom

[GTOLou]

Doug's dports for what car?

[Schroeder]

This is all for a 77 TA. I also updated my first posting to include that.

I am giving Dave a lot of my money. I am on a budget though and am just doing some bargain shopping. Dave will get his shot. Believe me lol. Its gonna kill my wallet and make his a whole lot thicker with all the stuff in getting from him. Not to mention the cam I already got from him

[tom s]

I would not buy used lifters,timing chains or oil pumps!JMO,Tom

[Schroeder]

For some reason I am not seeing an "edit post" button on my first post, so I can't add this information there...

I am also in need of a holley HP 950 carb.

[Schroeder]

TTT

[FASTASSBIRD]

I have a set of hedman ceramic coated D-port headers for 70-81 body. Gonna be looking for 67-69 round ports instead now so these are available

[Schroeder]

thanks fastassbird, but I heard the headman's are somewhat restrictive in flow. I think I'm looking for doug's.

[besserspat]

i have what you are looking for, new roller lifters, roller cam, roller rockers etc...

[Butcher]

Schroeder, you have mail. Butcher

[Schroeder]

guys, I also need a crankshaft pulley. A good one without rust holes in it haha.

I also need a tomahawk valley pan or some other equivalent. I would like new. Something with clearance for 1.65 rockers and pcv hole would be nice.

[Schroeder]

Guys, I no longer need the MSD setup or the torker II intake. I would like to add the following though:

Holley HP 950
flow kooler water pump
delphi 670 steering box
quick time 8070 steel bellhousing.

I mentioned this in my first post but did not call out the specific brand. I THINK this is the only steel one that accommodates both an M21 and a tremec tko600, so it will be the one I need.

[Schroeder]

need tall valve covers too to give me more clearance for the full roller rockers.

Moroso, butler ones, anything really. If you have them around I want them if you can get rid of them.

[Schroeder]

Ttt. Take a look at my list,guys. Hopefully you can help!

[tom s]

Stock cover will clear almost any full roller rocker with the thick gaskets!Tom

[tom s]

one of my TKOs is on a Mcleod bellhousing.Im sure a Lakewood will work also.Tom

[Schroeder]

Originally Posted by tom s

Stock cover will clear almost any full roller rocker with the thick gaskets!Tom

What part number are these? I see guys talk about these a lot but I'm unsure as to how to specify between the two when ordering parts.

I believe the tko bolts up to several bellhousing units, but it also must accept a Muncie 21 because I will b running a muncie on the steel bellhousing for some time before I purchase the tko.

[tom s]

Butler sells them.If you buy a GM TKO it will bolt up to any pontiac bellhousing a muncie will.Tom

[Schroeder]

Ttt