FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
|||
|
|||
THERE IS A 74-75 LOWER VALANCE FOR SALE ON E-BAY. #2461725292. WHAT'S IT WORTH? FRANK
|
#2
|
|||
|
|||
THERE IS A 74-75 LOWER VALANCE FOR SALE ON E-BAY. #2461725292. WHAT'S IT WORTH? FRANK
|
#3
|
||||
|
||||
50tooslow,
These are hard to come by, I've seen them go for at least 300 on ebay. that one looks nice. Texas Trans Am sells reproductions, but I heard the fit is not that good. I've been holding onto a spare for just in case mine gets messed up. As a matter of fact I have almost a whole front clip just in case. 74/75 bumper, valance are one year only. I'm always track these just in case I need $$$ someday
__________________
74 Formula Below motor destroyed last fall 469, 6X-4's, 72 Intake, Ramair Manifolds. 3 inch exhaust with x-pipe Custom Roller Cam, 1.52 Roller Rockers Quadrajet done by Cliff 3:42 gears 12.061 @ 110.74 12.092 @ 112.43 12.128 @ 111.71 New motor 461 stroker Edelbrock 87 cc dport heads Performer RPM Same Ram Air manifolds, and quadrajet Results will be posted after the track |
#4
|
||||
|
||||
bumper / valance are two years only
__________________
74 Formula Below motor destroyed last fall 469, 6X-4's, 72 Intake, Ramair Manifolds. 3 inch exhaust with x-pipe Custom Roller Cam, 1.52 Roller Rockers Quadrajet done by Cliff 3:42 gears 12.061 @ 110.74 12.092 @ 112.43 12.128 @ 111.71 New motor 461 stroker Edelbrock 87 cc dport heads Performer RPM Same Ram Air manifolds, and quadrajet Results will be posted after the track |
#5
|
|||
|
|||
Thanks. This one is over $200.00 already. you never see them for sale.
|
#6
|
||||
|
||||
It took me forever to find a decent bumper and valance. You may know this already, but the only difference in '74 vs '75 is that '74 has turn signals and '75 has black louver type filler pieces. You can easily make one fit the other. Also, if you're putting it on a T/A, Chris right here at Performance Years carries an AWESOME reproduction lower front spoiler. I bought one from Year One and it wasn't even close.
|
#7
|
|||
|
|||
What about the bumper pad covers for the front of the TA. Mine is all ceacked and torn. Where can I get a pad/ cover @?????
Tony. |
#8
|
||||
|
||||
Went for US $374.99.
Repro's are available at http://www.texastransams.com/ http://www.classicalpontiac.com/members/117/6.html [This message was edited by form74 on February 24, 2004 at 06:46 PM.]
__________________
74 Formula Below motor destroyed last fall 469, 6X-4's, 72 Intake, Ramair Manifolds. 3 inch exhaust with x-pipe Custom Roller Cam, 1.52 Roller Rockers Quadrajet done by Cliff 3:42 gears 12.061 @ 110.74 12.092 @ 112.43 12.128 @ 111.71 New motor 461 stroker Edelbrock 87 cc dport heads Performer RPM Same Ram Air manifolds, and quadrajet Results will be posted after the track |
#9
|
||||
|
||||
<BLOCKQUOTE class="ip-ubbcode-quote"><font size="-1">quote:</font><HR>Originally posted by TAZ:
What about the bumper pad covers for the front of the TA. Mine is all ceacked and torn. Where can I get a pad/ cover @????? Tony. <HR></BLOCKQUOTE> I take it you're refering to the two what I call "bumperettes" that are to the left and right of the license plate area? If so, I'm not aware of anyone that makes them. I may have a set stashed away somewhere. I'll be going through all of my parts closer to spring. If I come across them, I'll let you know. |
#10
|
|||
|
|||
Thats right Addict,
I found a GM parts list that has the proper name of the assy. were talking about. It is called the Front face bar 74',75' modle only. GM p/n is 498472. If you do happen to run across a set please let me know. Thanks, Tony. |
#11
|
||||
|
||||
Here's another front valance for sale on Ebay again.
http://cgi.ebay.com/ebaymotors/ws/eB...tem=2462642574
__________________
74 Formula Below motor destroyed last fall 469, 6X-4's, 72 Intake, Ramair Manifolds. 3 inch exhaust with x-pipe Custom Roller Cam, 1.52 Roller Rockers Quadrajet done by Cliff 3:42 gears 12.061 @ 110.74 12.092 @ 112.43 12.128 @ 111.71 New motor 461 stroker Edelbrock 87 cc dport heads Performer RPM Same Ram Air manifolds, and quadrajet Results will be posted after the track |
#12
|
|||
|
|||
TAZ,
I might have a set of bumperettes. I will try to look this weekend. |
#13
|
||||
|
||||
__________________
Jeff Schneider Alliance, NE |
#14
|
||||
|
||||
The bumperettes are not seperate parts on my 74 and they are a little shorter in 74 than 75. There is definitely a difference. Are they seperate pieces in 75?
__________________
Bob Woodard Brighton, MI 2012 SRT8 Charger - 12.70 @ 111mph |
#15
|
|||
|
|||
I have a pair of NOS bumperettes. They came with my 74 T/A when I bought it, because one of mine is torn. The original owner was planning to replace them.
So on 74's, will these come off? Mike |
#16
|
||||
|
||||
Are the original 74-75 valance made of flexible plastic or metal ? I just picked one up at the swapmeet and it is probably a 75 because of the lower black louvers in the lower corners.
|
#17
|
||||
|
||||
The valance is white injection molded plastic. If it has black louvered block off plates in the 74' foglight sockets it is a 75'.
__________________
Nothing is impossible if you break it down into possibilities. It's all a matter of "Want to". |
#18
|
||||
|
||||
Thanks ! It is sort of grayish color (unpainted) and looks like it is going to be hard to paint to match the car color, I only found a part number on it 492465. Maybe NOS ??? I only paid forty dollars canadian for it. What's the best way to paint these valances ?
|
#19
|
||||
|
||||
Quote:
It will have to be roughed up to have anything stick too it. Be sure to use a flex agent or it will crack and flake. A good body guy will know the tricks.
__________________
Nothing is impossible if you break it down into possibilities. It's all a matter of "Want to". |
#20
|
||||
|
||||
I wish I could post a pick of it but I don't know how, computer illetterate that I am ! Thanks again.
|
Reply |
|
|