FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
|||
|
|||
Where does this dash light/plug go on my 73 dash?
I am reinstalling my dash and have an extra light/plug that I'm not sure where it goes. Perhaps I have another light plugged in where its not supposed to go? It lloks like it could go in the tach/speedo housing or the heater housing. Any help is apprecisted. Thanks
__________________
73 Trans Am Red/White #'s match 4spd...... sold 69 Firebird 400 conv #'s match AT Blue wht/wht 06 Vette conv Red/Red/Blk |
#2
|
||||
|
||||
That one goes into one of the dash light holes in the lower right side of your speedo cluster.
It actually transmits light through fiber-optics to your ashtray for illumination.
__________________
Eye Candy......garage band? https://www.youtube.com/watch?v=QUPcHxHRx3s Go full screen & turn it UP! |
The Following User Says Thank You to 2manyT/A'S For This Useful Post: | ||
#3
|
|||
|
|||
So the other end of this ends up at the ashtray?
__________________
73 Trans Am Red/White #'s match 4spd...... sold 69 Firebird 400 conv #'s match AT Blue wht/wht 06 Vette conv Red/Red/Blk |
#4
|
||||
|
||||
That's right.
__________________
Eye Candy......garage band? https://www.youtube.com/watch?v=QUPcHxHRx3s Go full screen & turn it UP! |
The Following User Says Thank You to 2manyT/A'S For This Useful Post: | ||
#5
|
||||
|
||||
I know this is SUPER old but Any chance u have a Pic for location of the bulb in the cluster housing....
__________________
1973 Firebird Navajo Orange w/shaker,1973 400/461,1972 Intake SD CNC'd,1977 Q-Jet 800 CFM w/ Cliffs Kit,Tanks Inc PA4 255 Walbro intank pump ,-8an feed/return,RobbMc Regulator,RobbMc 40 micron filter,253 CFM 6x-8's w/H.S 1:5 Roller Rockers,SD Stump Puller H/R Cam 230/236 @.050 112 lobe separation 565/.570 lift,Crower Solid Rollers,28150 Hedman Headers,3" exhaust,full tailpipes,350 Turbo,9.5" 3200 Converter,3:42 gear,8.5 posi,C/E slide-alinks,Koni adj frt shocks,Best 12.18@110.55 Lookin for 11's Last edited by cnc; 01-29-2023 at 04:11 PM. |
#6
|
||||
|
||||
Furthest to bottom right as you face front of gauges, must be a parking light socket.
__________________
"The Future Belongs to those who are STILL Willing to get their Hands Dirty" .. my Grandfather |
The Following User Says Thank You to Formulabruce For This Useful Post: | ||
#7
|
||||
|
||||
Funny, mine was in the upper, passenger side.
Another question. Chris, or anyone else, does your '73 have pins or screws holding the lens cover on? And, date of car or printed circuit?
__________________
So long, farewell. |
#8
|
||||
|
||||
Quote:
I have changed out the cluster of this car as it was originally an idiot light car so the circuit board has been changed out and I re pinned the harmonica connector to get everything to work, as for the lens I’ll take a look tomorrow …..I have the original cluster too from the car still or pretty sure I should have it let me check tomorrow…
__________________
1973 Firebird Navajo Orange w/shaker,1973 400/461,1972 Intake SD CNC'd,1977 Q-Jet 800 CFM w/ Cliffs Kit,Tanks Inc PA4 255 Walbro intank pump ,-8an feed/return,RobbMc Regulator,RobbMc 40 micron filter,253 CFM 6x-8's w/H.S 1:5 Roller Rockers,SD Stump Puller H/R Cam 230/236 @.050 112 lobe separation 565/.570 lift,Crower Solid Rollers,28150 Hedman Headers,3" exhaust,full tailpipes,350 Turbo,9.5" 3200 Converter,3:42 gear,8.5 posi,C/E slide-alinks,Koni adj frt shocks,Best 12.18@110.55 Lookin for 11's |
#9
|
||||
|
||||
IMO, not a couple options.
Bottom 2 on the right are brake and seat belt lights.
__________________
So long, farewell. |
#10
|
||||
|
||||
Yes looking at a cluster pic the lower area would be warning lights looks like upper section like your pic
__________________
1973 Firebird Navajo Orange w/shaker,1973 400/461,1972 Intake SD CNC'd,1977 Q-Jet 800 CFM w/ Cliffs Kit,Tanks Inc PA4 255 Walbro intank pump ,-8an feed/return,RobbMc Regulator,RobbMc 40 micron filter,253 CFM 6x-8's w/H.S 1:5 Roller Rockers,SD Stump Puller H/R Cam 230/236 @.050 112 lobe separation 565/.570 lift,Crower Solid Rollers,28150 Hedman Headers,3" exhaust,full tailpipes,350 Turbo,9.5" 3200 Converter,3:42 gear,8.5 posi,C/E slide-alinks,Koni adj frt shocks,Best 12.18@110.55 Lookin for 11's |
#11
|
||||
|
||||
HFR's pic is correct as the Bottom trio are NOT parking light on 73
__________________
"The Future Belongs to those who are STILL Willing to get their Hands Dirty" .. my Grandfather |
#12
|
||||
|
||||
IIRC the earlier clusters used those funny pins to hold the lens on, the latter ones were the 1/4”(?) screws
__________________
1970 Formula 400 Carousel Red paint on Black standard interior A no-engine, no-transmission, no-wheel option car. Quite likely one of few '70 Muncie three speed Formula 400's left. 1991 Grand Am: 14.4 @ 93.7mph (DA corrected) (retired DD, stock appearing) 2009 Cobalt SS: 13.9 @ 103mph (current DD; makes something north of 300hp & 350ft/lbs) |
#13
|
||||
|
||||
Ok here is what I have original cluster screws to hold the lens, this pic answered my own question on the fiber optic bulb position and that's the sticker that is on it...
__________________
1973 Firebird Navajo Orange w/shaker,1973 400/461,1972 Intake SD CNC'd,1977 Q-Jet 800 CFM w/ Cliffs Kit,Tanks Inc PA4 255 Walbro intank pump ,-8an feed/return,RobbMc Regulator,RobbMc 40 micron filter,253 CFM 6x-8's w/H.S 1:5 Roller Rockers,SD Stump Puller H/R Cam 230/236 @.050 112 lobe separation 565/.570 lift,Crower Solid Rollers,28150 Hedman Headers,3" exhaust,full tailpipes,350 Turbo,9.5" 3200 Converter,3:42 gear,8.5 posi,C/E slide-alinks,Koni adj frt shocks,Best 12.18@110.55 Lookin for 11's |
#14
|
||||
|
||||
Here is what's in the car same deal screws for the lens however the fuel volt is clips I'm not sure where I got this from might have come in the car in a box when I got it.
__________________
1973 Firebird Navajo Orange w/shaker,1973 400/461,1972 Intake SD CNC'd,1977 Q-Jet 800 CFM w/ Cliffs Kit,Tanks Inc PA4 255 Walbro intank pump ,-8an feed/return,RobbMc Regulator,RobbMc 40 micron filter,253 CFM 6x-8's w/H.S 1:5 Roller Rockers,SD Stump Puller H/R Cam 230/236 @.050 112 lobe separation 565/.570 lift,Crower Solid Rollers,28150 Hedman Headers,3" exhaust,full tailpipes,350 Turbo,9.5" 3200 Converter,3:42 gear,8.5 posi,C/E slide-alinks,Koni adj frt shocks,Best 12.18@110.55 Lookin for 11's |
#15
|
||||
|
||||
well then, I stand corrected
__________________
1970 Formula 400 Carousel Red paint on Black standard interior A no-engine, no-transmission, no-wheel option car. Quite likely one of few '70 Muncie three speed Formula 400's left. 1991 Grand Am: 14.4 @ 93.7mph (DA corrected) (retired DD, stock appearing) 2009 Cobalt SS: 13.9 @ 103mph (current DD; makes something north of 300hp & 350ft/lbs) |
#16
|
||||
|
||||
The pins were used for the FUEL/VOLTS package I think for all years.
Chris, you said that the cluster was an upgrade by you, so I can't include that unless you had the date stamp showing the date. Jonny, that would be for a '74 and I know they switched sometime in the '73 model year.
__________________
So long, farewell. |
The Following User Says Thank You to Held for Ransom For This Useful Post: | ||
#17
|
||||
|
||||
i meant to go dig out my clusters;
iirc I kept them original, or when I repaired one, I intentionally put it back as it was.
__________________
1970 Formula 400 Carousel Red paint on Black standard interior A no-engine, no-transmission, no-wheel option car. Quite likely one of few '70 Muncie three speed Formula 400's left. 1991 Grand Am: 14.4 @ 93.7mph (DA corrected) (retired DD, stock appearing) 2009 Cobalt SS: 13.9 @ 103mph (current DD; makes something north of 300hp & 350ft/lbs) |
#18
|
||||
|
||||
Quote:
Hopefully those of you who recognize my posts know that I am all too happy to share my recollections, or observations - but I am by no means a professed expert - so if someone suggests I am wrong, I will generally back of - unless I have good reason to be stubborn I try to always be clear when I am going off memory, versus my source, or if I am (which I do on occasion) offering my opinion. Second, I went and check my remaining small collection - here is what I have found; My findings absolutely back up HFR's prior post. All my secondary pods (fuel/volts) that I have use the clips - this includes the couple "UNLEADED FUEL ONLY" (1975+) pods.
Even though my ZA gauges dated as being 1971, I consider them a part of my complete "collection" of 1970 gauges (I think I have all versions). EDIT: I looked for a listing I made here years ago for a spare set of 1973 rally gauges w/tach that I had, but it, and the attachments are gone - but I found it in my personal files; the printed circuit appears to be dated Dec 12th, the case is stamped what appears to be March 1973, and it too had the clips.
__________________
1970 Formula 400 Carousel Red paint on Black standard interior A no-engine, no-transmission, no-wheel option car. Quite likely one of few '70 Muncie three speed Formula 400's left. 1991 Grand Am: 14.4 @ 93.7mph (DA corrected) (retired DD, stock appearing) 2009 Cobalt SS: 13.9 @ 103mph (current DD; makes something north of 300hp & 350ft/lbs) Last edited by unruhjonny; 01-31-2023 at 04:11 PM. |
#19
|
||||
|
||||
Quote:
Oops, I misread the date on the picture that cnc posted and said Jonny posted it. It actually reads 1-25-73 and apparently has the screws. Thanks.
__________________
So long, farewell. |
Reply |
|
|