FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
|||
|
|||
1972 400 block .060 $300 with N crank
1972 400 block rough bored for .060 over. It had some pitting in one hole I wanted to be sure it was ok for .060 over and it is. Comes with the original N crank for this block and it’s standard. $300.00 pick up only.
|
#2
|
||||
|
||||
That's close to all you can go. You would need to sonic check the block to see if you can go bigger or you would need to sleeve the block.
|
#3
|
|||
|
|||
That’s all it needs to go finish hone line hone and assemble. Going .060 over is not a big deal.
|
#4
|
|||
|
|||
Norwalk
|
#5
|
|||
|
|||
Bump
|
#6
|
|||
|
|||
Norwalk
|
#7
|
|||
|
|||
Bump
|
#8
|
|||
|
|||
I have a complete set of.065 forged pistons, pins, rings also for this build if anyone is interested before I start on it myself. Pistons are 21cc Dish $850 for block crank and piston kit.
|
#9
|
|||
|
|||
Bump
|
#10
|
|||
|
|||
Bump
|
#11
|
|||
|
|||
Bump
|
#12
|
|||
|
|||
Bump
|
Reply |
|
|