FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#21
|
|||
|
|||
Carburetor gasket
|
#22
|
||||
|
||||
Yup, wrong one!
__________________
Wernher Von Braun warned before his retirement from NASA back in 1972, that the next world war would be against the ETs! And he was not talking about 1/8 or 1/4 mile ETs! 1) 1940s 100% silver 4 cup tea server set. Two dry rotted 14 x 10 Micky Thompson slicks. 1) un-mailed in gift coupon from a 1972 box of corn flakes. Two pairs of brown leather flip flops, never seen more then 2 mph. Education is what your left with once you forget things! |
#23
|
||||
|
||||
You have a plugged fitting at the rear of carb you can use for the distributor ignition vacuum advance hose, instead of the fitting on #1 runner wich is good only for the vacuum motor on the air cleaner, for proper vacuum signal strength.
No need to remove the intake manifold, just lift off the carb while removing the flexplate bolt and install the proper PCV valve hose fitting. Nothing wrong with the carb flange gasket as far as i can see. |
Reply |
|
|