FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
||||
|
||||
Worth anything?
A few years ago I wouldn't have even bothered to ask. But, these days, prices are so generally insane and some things are hard enough to come by, I almost always ask now.
Is there any value in the original timing belt from an OHC 6? (Sprint motor if that makes a difference) In the past I would've thought that was a ridiculous question. But, we live in crazy times.
__________________
"What the hell's wrong with freedom man? That's what it's all about." (Billy) "Oh yeah, that's what it's all about alright... but talkin about it and bein it, that's two different things." (George) Easyrider |
#2
|
||||
|
||||
As in USED? No.
New ones are avail, just not at the Parts Store. If it's in good condition and has never been overexposed to UV and/or oil soak just keep it as a spare. I use an OE belt to run tests now and then on projects but that's about it.
__________________
When I die, I want to go peacefully like my grandfather did, in his sleep. Not screaming like the passengers in his car. |
#3
|
||||
|
||||
Thanks
__________________
"What the hell's wrong with freedom man? That's what it's all about." (Billy) "Oh yeah, that's what it's all about alright... but talkin about it and bein it, that's two different things." (George) Easyrider |
#4
|
||||
|
||||
I also have a couple OHC 6 blocks(9787437 and 9782000), cranks, rods that were disassembled 40+ years ago and left sit. Because of this, they would need to go through the machine shop before there was any possibility of using them. Are they worth anything other than scrap?
__________________
"What the hell's wrong with freedom man? That's what it's all about." (Billy) "Oh yeah, that's what it's all about alright... but talkin about it and bein it, that's two different things." (George) Easyrider |
#5
|
|||
|
|||
Quote:
unless the buyer is local it usually costs more to ship than its worth
__________________
Everything comes and goes Pleasure moves on too early And trouble leaves too slow |
#6
|
||||
|
||||
I knew my market would be really small because of shipping issues. Hoping I can find someone local who could use them.
__________________
"What the hell's wrong with freedom man? That's what it's all about." (Billy) "Oh yeah, that's what it's all about alright... but talkin about it and bein it, that's two different things." (George) Easyrider |
#7
|
||||
|
||||
PARTS VALUE
On this site, I would say very little, just due to the low number of Cammers here.
Even if you can't sell them, they may have value to another Cammer in your area who may be willing to come pick them up. Not sure if you're aware of our OHC 6 Facebook forum or not but it has a fair number of members and I would say post your parts there as well as here. As far as shipping large bits, I always prefer the seller to use Fastenal. This IMO is the most economical way to ship engines and/or engine parts. Cheers.
__________________
When I die, I want to go peacefully like my grandfather did, in his sleep. Not screaming like the passengers in his car. |
The Following User Says Thank You to Jeff Hamlin For This Useful Post: | ||
Reply |
|
|