FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
||||
|
||||
Who does MSD refurb?
I have an old MSD 6AL that needs work. I sent an email to Holley, no response. Does anyone know who does refurbishment work on these? Thx.
Sent from my iPhone using Tapatalk |
#2
|
||||
|
||||
Refurb as in replacing a wire or wire harness is not the same as repairing when it comes to electronics!
Is the box dead?
__________________
I do stuff for reasons. |
#3
|
||||
|
||||
If you are talking about the inside of the box, there is or used to be a company that did that.
TechWest Racing Services comes to mind but not sure of that. Do a search on PY it has been discussed years ago.
__________________
John Wallace - johnta1 Pontiac Power RULES !!! www.wallaceracing.com Winner of Top Class at Pontiac Nationals, 2004 Cordova Winner of Quick 16 At Ames 2004 Pontiac Tripower Nats KRE's MR-1 - 1st 5 second Pontiac block ever! "Every man has a right to his own opinion, but no man has a right to be wrong in his facts." "People demand freedom of speech to make up for the freedom of thought which they avoid." – Socrates |
#4
|
|||
|
|||
TechWest Racing Services
http://drr.infopop.cc/eve/forums/a/t...2/m/8817074186 ( Information provided in this post does not represent any endorsement and is offered for general interest only ) .
__________________
'70 TA / 505 cid / same engine but revised ( previous best 10.63 at 127.05 ) Old information here: http://www.hotrod.com/articles/0712p...tiac-trans-am/ Sponsor of the world's fastest Pontiac powered Ford Fairmont (engine) 5.14 at 140 mph (1/8 mile) , true 10.5 tire, stock type suspension https://www.youtube.com/watch?v=qDoJnIP3HgE |
#5
|
||||
|
||||
I had an issue with my 6AL 10 years ago and I sent it back to MSD to be repaired, it was reasonably priced.
__________________
1967 Firechicken, 499", Edl heads, 262/266@0.050" duration and 0.627"/0.643 lift SR cam, 3.90 gear, 28" tire, 3550#. 10.01@134.3 mph with a 1.45 60'. Still WAY under the rollbar rule. |
#6
|
||||
|
||||
I did get a response from Holley pasted in below and TechWest did confirm they will refurb old units. I ended up going with a replacement but good to know as a backup:
You will want to call the MSD specialist at 866-464-6553. We can get boxes in to service them, and the guys on the phone can tell you how much this would be and also get you setup for this service. Thanks, Matthew Richmond Customer Communications Specialist 1-866-464-6553 | www.holley.com |
Reply |
|
|