[Mike Kasparian,Sr.]

Just checking to see if any of the fast NA guys have anything to sell before I order one .You can send me a pm , thanks Mike sr .

[Fast Floridian]

I got one laying around still in the box it's an LS firing order

[mysticmissle]

I am also looking, if mike passes shoot me the specs

[Mike Kasparian,Sr.]

Fast , you can pm me with specs and price if you want . Thanks Mike .

[mgarblik]

55 MM round cores are a problem now. We may need to put together a block buying order together and try to leverage LSM or Bullet into making a run of 25-50 pieces based on the need out there. That would bring the cost down and peak their interest possibly. 12 to 16 weeks for cores is the time line I am getting for cores and another month minimum to make a camshaft. Bullet has a single core on the shelf, no distributor gear. May want to secure it if you can run without the gear. If the material is there, they can possibly cut the gear for you.

[Mike Kasparian,Sr.]

Yea Comp told me 15 weeks . Car isn't going to be done this year but wanted to finish engine and get it to dyno this summer .

[3fastgtos]

Isn’t a 50MM an option if you use needle cam bearings?

[Mike Kasparian,Sr.]

Originally Posted by 3fastgtos

Isn’t a 50MM an option if you use needle cam bearings?

Yes but not with the lobes I was using with my other 55MM cam .

[mgarblik]

Since LSM and Bullet are the few companies that make cores for us, I wish they would just bite the bullet and make a make a run of 25-50 round billet cores. They would certainly sell them in a year or two. All the other cam companies buy their cores from them. Possibly someone who knows how to do it could set up a poll and see what the interest is in making a run?