[dhutton]

Anyone need any parts off a 64 LeMans post shell? I used the C pillars and tail panel on my 64 GTO but it has a solid factory air firewall and cowl, solid dash except lower window channel needs to be replaced, solid door posts including B pillars and the roof is not too bad including the A pillars. There is a hood but the deck lid has a little rot on the back edge. I also have tinted quarter glass and both doors are solid and complete with tinted glass. I need to list a price so let's say $50 but let me know what you are interested in. I don't want to scrap it when someone could make good use of the parts. Pickup only.

Thanks,
Don

[El-bandit]

how much for the tinted glass?

email me at gto64@amarlen.com

thanks

[dhcarguy]

I am looking for the aluminum trim on the sides of doors and sides of windows.

Dave

[dhutton]

Originally Posted by dhcarguy

I am looking for the aluminum trim on the sides of doors and sides of windows.

Dave

I have some of it but some pieces were damaged. I will look to see what I have tonight unless you are looking for a full set.

Don

[dhutton]

Bump. Is any of this worth saving or should I just scrap it?

Thanks,
Don

[Dick Boneske]

How are the anodized aluminum beltline pieces next to the side windows? Is the AM radio functional? I could use a good tail lamp wire harness and front light harness. Are any of the dash knobs and/or bezels in good shape? Do you have the Caplugs for the inside rear quarter near the window crank? I could use any or all of the above for my '64 post coupe.

Thanks

[dhutton]

Originally Posted by Dick Boneske

How are the anodized aluminum beltline pieces next to the side windows? Is the AM radio functional? I could use a good tail lamp wire harness and front light harness. Are any of the dash knobs and/or bezels in good shape? Do you have the Caplugs for the inside rear quarter near the window crank? I could use any or all of the above for my '64 post coupe.

Thanks

I pretty much only have what was listed here. The anodized trim is not complete, some pieces are missing. The radio is long gone and I used the harness and dash parts etc for my 64 GTO. I do have the firewall and interior A/C parts if anyone is interested. I am mostly just trying to find a home for the shell parts since they are solid and I don't want to scrap them.

Thanks,
Don

[brian damian]

how are the doors and how much for the doors?

[Dick Boneske]

Brian,
Regarding beltline moldings, I have the two driver's side pieces. Do you have one or both of the passenger side pieces, especially the rear piece?

[dhutton]

Originally Posted by brian damian

how are the doors and how much for the doors?

Doors are solid. Some surface rust but nothing major. Driver's door has a dent at the rear that is repairable. Someone rolled some blue paint on the passenger's door. Let me know if you are interested.

[dhutton]

Lots of interest in parts that I did not list but here are a couple of pics. I hope someone will take some of the big body parts instead of these small easy to store parts. The quarter window beltline moldings are damaged, the door beltline moldings are still on the doors.

Don

[tjwelter]

How much for the outside post trim? Thanks John

[brian damian]

i'll take the complete doors if they are reasonably priced.i'm local so no worries about
shipping.

[dhutton]

Since I have had requests for some of the parts not originally listed I'll list some prices:

10 pieces of door post molding with 8 clips $250 obo
both doors with glass and without beltline molding $275 obo
both doors with glass and beltline molding $325 obo
16 pieces quarter panel vent trim $80 obo

I have no idea whether or not these prices are fair, I researched them as best I could on here. Feel free to make an offer. I hate shipping parts so if you are local come on by and take a look.

Thanks,
Don

[dhutton]

Door post moldings are sold pending payment.

Thanks,
Don

[dhutton]

Post trim is sold, new prices on some of the other parts:

both doors with glass and without beltline molding $200 obo
both doors with glass and beltline molding $235 obo
16 pieces quarter panel vent trim $50 obo

Still hoping someone will take some or all of the shell before I have to scrap it.

Thanks,
Don

[dhutton]

Had to get this out of the shop so I took a sawzall to the good parts.

Decent wheel housings and trunk extensions with center upper trunk floor that can be used if someone doesn't want to mess with repops. The the trunk brace/mounts are not rotted out.
Package tray with deck lid hinges in good shape except for speaker holes.
Cowl, firewall and dash. Top of dash is rusted in windshield channel.
Both door posts and inner panels.
Roof a little rust but useable if someone can't fix theirs.

All parts are pickup only. If no one wants them I am going to have to find a rusted out project... :>)

Also have the rolling frame but it is tweaked in the right rear. Could be straightened I think. It's a shame because it is solid otherwise including all the body mounts.

Don