FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
||||
|
||||
Replace Drivers Kick Panel
Non AC car - need to remove and replace the drivers kick panel. I searched and found a couple of posts, but not a lot of info.
Sounds like the e-brake needs to come out? Along with a handful of screws and the cable connection to the vent door. The posts I did find indicated that the bolts for the e-brake are difficult to get to. My car is currently at the bodyshop - is this something I should be doing now before the fenders go back on or does it not make any difference?
__________________
Peter 1974 Trans Am, 400 4-speed, 3.42 rear. |
|
|