FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
|||
|
|||
Convertible Pinch Weld Stainless - 68/9 Abody
Very clean original GM convertible pinchweld stainless molding....fits '68-9 GM Abody...
>Pulled from a '68 or '69 Tempest convertible >Super clean pieces....no dents, gouges, etc. I've done all the hard AND time consuming work already....sanded out any scratches, removed a few dings, wetsanded, etc. You (or your stainless polisher) can do some final wetsanding and move on to the buffing wheel to finish these up. >Fits '68 - 69 GM Abody....from what I have seen, THESE ARE DIFFERENT from the '70-72 pinchweld stainless pieces. Had a customer try to line these up/test fit them on his '72 442 convert and they are SLIGHTLY different up at the ends that mate up to the quarter glass outer sweepers (I think these 68/9 pieces are slightly longer). Again, I pulled these from the Tempest that they were originally installed on (68/9 car). PM or post here with any questions. No heavy belt sanding, etc was used on these so they're not "thinned out", etc. These had a few minor dings and the typical scratching/scuffing you find in used original parts..now removed. $200 + shipping. Payment by regular check or MO...no paypal. I'm in Austin,TX and will box these VERY WELL and ship fully insured. Thanks
__________________
Patton Glade 70Post Restorations Austin, TX 64-72 GM A-Body Gas Tank Pads http://classicoldsmobile.com/forums/...tion-item.html |
|
|