FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
|
#1
|
||||
|
||||
Door lock knobs
Just looking at my lock knobs and they are peeling would like to change them out…
I found I have another lock knob but only a single….and it’s different …and not sure what it’s from Did these change through the years….?? I’ll post a pic in the morning of what I have on the car… And a good source ( Ames ???? ) for new ones that are correct if they are diff throughout the years…
__________________
1973 Firebird Navajo Orange w/shaker,1973 400/461,1972 Intake SD CNC'd,1977 Q-Jet 800 CFM w/ Cliffs Kit,Tanks Inc PA4 255 Walbro intank pump ,-8an feed/return,RobbMc Regulator,RobbMc 40 micron filter,253 CFM 6x-8's w/H.S 1:5 Roller Rockers,SD Stump Puller H/R Cam 230/236 @.050 112 lobe separation 565/.570 lift,Crower Solid Rollers,28150 Hedman Headers,3" exhaust,full tailpipes,350 Turbo,9.5" 3200 Converter,3:42 gear,8.5 posi,C/E slide-alinks,Koni adj frt shocks,Best 12.18@110.55 Lookin for 11's Last edited by cnc; 08-20-2023 at 10:04 PM. |
#2
|
|||
|
|||
Early were ribbed, later plain. Many variations able to be swapped to taste. 68-72 seems a popular thought on the ribbed.
|
#3
|
|||
|
|||
chrome pulls from ames
I just received my pulls from ames. they are exactly as my chrome peeling originals.
ames reccomends to run a tap thru them so as they screw on tight they won't crack. i did that, zero issues same as original. like em. funny thing how back "in the day" the lock pulls we changed out right away on our cars to something catchy or those straight anti-theft ones. now, we want what we thought was to ordinary back then. |
#4
|
|||
|
|||
Quote:
John
__________________
70 TA RAIII M20 05D 70 TA RAIII M20 06B |
#5
|
||||
|
||||
This is what I have on the car would just some good replacements
__________________
1973 Firebird Navajo Orange w/shaker,1973 400/461,1972 Intake SD CNC'd,1977 Q-Jet 800 CFM w/ Cliffs Kit,Tanks Inc PA4 255 Walbro intank pump ,-8an feed/return,RobbMc Regulator,RobbMc 40 micron filter,253 CFM 6x-8's w/H.S 1:5 Roller Rockers,SD Stump Puller H/R Cam 230/236 @.050 112 lobe separation 565/.570 lift,Crower Solid Rollers,28150 Hedman Headers,3" exhaust,full tailpipes,350 Turbo,9.5" 3200 Converter,3:42 gear,8.5 posi,C/E slide-alinks,Koni adj frt shocks,Best 12.18@110.55 Lookin for 11's |
#6
|
||||
|
||||
GM PN is/was 9813799, smooth. OER has a repro. Summit sells a wrong looking kit.
__________________
So long, farewell. Last edited by Held for Ransom; 08-21-2023 at 11:30 PM. |
Reply |
|
|