I have the Scarebird FRONT and REAR disc brake kits on my 66 Catalina Ventura I am having an issue with the rear disc brake ebrake pad. I am using the recommended AC Delco rotor and the epad that Scarebird supplied. The ID of the rotor is 7.5". The epad is the basically the same size (10/100 less than rotor - leaves only 5/100 around rotor- seems like too small of tolerence-??). After test driving - noticed epad was totally dragging. Removed and inspected epad (on both sides) and the pad was chattered from one end to the other. Could barely turn the rotor by hand with the ebrake pad installed. I removed the epad and test drove and no problems with balance of setup. I contacted Scarebird and provided them with information they requested and they say all is fine and should be working without issue. No other remedy was offered. Has anyone else had an issue with the ebrake setup and have any possible solutions?
|