Quote:
Originally Posted by Stan65
Based on front picture, you do not have the correct 8k tach. You will need the printed circuit board available aftermarket. Get it for your correct year. Pull all of the tape off of the holes. Compare the harmonica plug on the new harness to the hole in the gauge housing. If it fits the housing will be ok. The tack will work if good although incorrect for your year.
You will need several bulb sockets. I’m sure members here can fix you up with those.
|
I'll pull the tape when I get home to see if there is even plug inside the gauge pod. I've got several bulb sockets that were pulled when I removed the hacked original harness.
Makes you wonder what some people's train of thought is sometimes.