Should be a "NOTE" on UPC #3 ( near the front) on a redesign on the lower control arm in the 73 assy manual. It appears, based on a very old camaro assy manual that in may there was a re design, there is a bunch of notes I cant read and it appears the actual pages were not replaced as it was late in the year. There should be a subframe update page as well since it got bigger holes when on the jig. It did upgrade the torque specs to 80-85 lbs at Z height , and mentions more than once the bolts can go in either way.
I had a june built 73 Z-28 with the bigger bolts.
__________________
"The Future Belongs to those who are STILL Willing to get their Hands Dirty" .. my Grandfather
|