Quote:
Originally Posted by HWYSTR455
Like I said, the knock-off tubular lower arms are fine, I run them in the 442, held them right next to a set of GWs and measured roughly without seeing any diff. Again, just change the ball joint.
.
|
Ordered a set of the “knock-off” tubular lower control arms, along with some proforged ball joints (uppers and lowers). Already have a set of used GW tubular upper control arms.
I assume the sway bar links that come on the “knock-off” lower arms are sufficient? They (sway bar end links) have some adjustability to them… any tips or tricks to getting that adjustment set correctly?
Sent from my iPhone using Tapatalk