It's a no go to do it with the heads in the boiler room on the motor!
If your running tall enough valve covers then one way around the issue at least for this Summer is to run poly locks instead of the stock rocker arm nut and then run a stud girdle which should add enough resistance to not have any other rocker studs pull up on you.
Also if you know someone who can weld you tack weld the stud to the boss with the right welding rod and proceedure.
TRW use to offer a hair oversized replacement stud which would work also if you can find any.
__________________
Wernher Von Braun warned before his retirement from NASA back in 1972, that the next world war would be against the ETs!
And he was not talking about 1/8 or 1/4 mile ETs!
1) 1940s 100% silver 4 cup tea server set.
Two dry rotted 14 x 10 Micky Thompson slicks.
1) un-mailed in gift coupon from a 1972 box of corn flakes.
Two pairs of brown leather flip flops, never seen more then 2 mph.
Education is what your left with once you forget things!
|