![Old](images/SultanThemeVB3R/statusicon-red/post_old.gif)
02-24-2013, 01:11 PM
|
![Scarebird's Avatar](image.php?u=144435&dateline=1154057068) |
Ultimate Warrior
|
|
Join Date: Nov 2002
Location: ABQ, USA
Posts: 5,054
|
|
I have been pecking away at the rear end. The 74-78 tail lights are much harder to mount than I thought but still doable. I had to weld in a set of pockets in the tail pan and a set of standoffs:
![](http://forums.maxperformanceinc.com/forums/attachment.php?attachmentid=314194&stc=1&d=1361725979)
I will use a set of delrin spacers to hold off the lamp assemblies.
A quick mock up gives an idea of the general fitment after the bumper brackets were tacked together. Will need to adjust and modify the brackets some but in the ballpark...
![](http://forums.maxperformanceinc.com/forums/attachment.php?attachmentid=314195&stc=1&d=1361725979)
Kinda like swimming in the ocean and getting a glimpse of the island you are swimming to.
A rough photoshop of what it should look like:
|