missing some mounting clips for my 72 firebird rear tail light harness
 

i am mounting my rear tail light harness on my 72 firebird . i have the ones that go on the trunk gutter ,but i think i need something at the ends near the tail lights

The tail light harness has a couple pinch clips taped on to retain it to the rear bumper side brackets inside the trunk for the side marker lights. Besides those and the four trunk gutter harness clips that is all there is.

i saw that firebird central sells some kind of clip that mounts on one of of the tail light screws

here is a pic of what i think harness should look like . please comment if incorrect .

hope its helps with this post

Great photos of your trunk. I want to detail mine like yours.
Is the small clip on both sides of the trunk
Are there only two of the black clips or 4
And what is the colour you used for your splatter paint

one clip on both side attached to bumper reinforcement as mention

4 clips on rear body panel That shielded harness hangs in

splatter done with spray gun after blk/gray epoxy as base. Then cleared with two stage clear with flatterer added as ness.

Sent you a PM

My parts bag only had one small clip in it.

ok how much